Wired Intelligent Edge

 View Only
last person joined: 22 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

2540-48G-PoE+ temperature sensor

This thread has been viewed 0 times

  • 1.  2540-48G-PoE+ temperature sensor

    Posted Mar 02, 2020 03:45 AM

    Hi!

    We have several Aruba JL357A 2540-48G-PoE+-4SFP+ switches in our network running revision YC.16.08.0001, ROM YC.16.01.0002. 

    "Show system temperature" command is not available. 

    How do I display the current temperature on these switches?


    #Temperature


  • 2.  RE: 2540-48G-PoE+ temperature sensor

    MVP GURU
    Posted Mar 02, 2020 09:32 AM

    Hi! IIRC Aruba 2540 Switch Series doesn't expose chassis temperature via CLI or GUI: I'm not sure there is any temperature sensor at all...



  • 3.  RE: 2540-48G-PoE+ temperature sensor

    Posted Mar 05, 2020 02:44 AM

    Thank you for your reply. 

    Can someone confirm if 2540 series has a temperature sensor, or not?



  • 4.  RE: 2540-48G-PoE+ temperature sensor

    EMPLOYEE
    Posted Mar 26, 2020 12:48 AM

    Hello ,

    Currently this model doesn't support Show System Temperature command, if you like to monitor the temperature of the device means, you need to use NMS and SNMP MIBs can be downloaded from below link 

    https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=JL357A

    And related to Temperature sensor, you may need to log case with HPE support guys. Since its related to product specification support team will help you to confirm .