Comware

 View Only
last person joined: 3 days ago 

Back to discussions
Expand all | Collapse all

2928 hpwr plus/ v1910-24g-poe firmware for pse

This thread has been viewed 0 times

  • 1.  2928 hpwr plus/ v1910-24g-poe firmware for pse

    Posted May 08, 2017 09:25 AM

    I've recently purchased this switch for our small business.  I checked the firmware version of the components and noticed the PSE firmware is corrupt (see below). I've been digging for the newest firmware version for the past 2 days, but i can only find it for the 1950/5130, and that does not work with the 1910. Any ideas/ luck with getting the firmware out there?

    <3com 24G>display poe pse
     PSE ID                           : 1
     PSE Slot No                      : 1
     PSE SubSlot No                   : 0
     PSE Model                        : LSW124POED
     PSE Current Power                : 0        W
     PSE Average Power                : 0        W
     PSE Peak Power                   : 0        W
     PSE Max Power                    : 740      W
     PSE Remaining Guaranteed         : 740      W
     PSE CPLD Version                 : -
     PSE Software Version             : 0
     PSE Hardware Version             : 0
     PSE Legacy Detection             : disabled
     PSE Utilization-threshold        : 80
     PSE PD Disconnect Detect Mode    : AC

     


    #firmware
    #poefirmware
    #pse
    #1910