Wired Intelligent Edge

 View Only
last person joined: 21 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

2930F, 2930M - 10G FO and 10G BASE-TX at the same time

This thread has been viewed 15 times
  • 1.  2930F, 2930M - 10G FO and 10G BASE-TX at the same time

    Posted Jun 24, 2022 09:19 AM
    Good morning to all,

    I'd like to receive some more information regarding the topic.
    We currently have 2930M and 2930F switches, either standalone or stacked.

    We'd like to add 10G connectivity.

    As far as I understand from the documentation:

    - 2930F only supports 10G Fiber Optic in its SPF+ slots, no BASE-TX transceivers or SFPs

    - 2930M does not support any 10G in its SFP slots
    -- we may add a JL083A in the rear slot, but this only supports 10G DAC or Fiber Optic in its SPF+ slots, no BASE-TX transceivers or SFPs
    -- we may add a JL081A in the rear slot, but this only supports four fixed 10G BASE-TX ports

    As such, neither with the 2930F nor with the 2930M we can have a single switch with 10GB FO and 10GB BASE-TX at the same time.

    Is that correct?

    If this is the case, could you recommend a switch which can support 10GB FO and 10GB BASE-TX at the same time, starting with the bottom product series upwards?

    Thank you in advance
    GG


  • 2.  RE: 2930F, 2930M - 10G FO and 10G BASE-TX at the same time

    EMPLOYEE
    Posted Jun 24, 2022 10:42 AM
    Hi Gino,

    I want to share the "switch selector" page with you, if you didn't have the chance to take a look there:
    https://techlibrary.hpe.com/ie/en/networking/products/switches/switch-selector.aspx#.YrXLznZBxjE

    You can filter the switches by the port type/speed, compare them and after that check the datasheets for more detailed information. (there are hyperlinks to the product details, when you open more details for each switch).


  • 3.  RE: 2930F, 2930M - 10G FO and 10G BASE-TX at the same time

    Posted Jun 24, 2022 11:32 AM

    The 2930M has 4 versions with Smart Rate ports that will take you up to your 10G Base-T ports and then add the JL083A for your 10G SFP+ off the back module.

     

    Models are JL323A, JL324A, ROM67A, ROM68A

     

    Regards,

    John Christie

    John Christie / Specialist in Wireless & Communications / Stagevision Inc.
    direct: 905.890.4427 / main: 905.890.8200 / fax: 905.890.8316
    toll free: 1.877.572.8200 / cell: 416.432-1066 call sign: VA3 RFG
    5915 Coopers Ave. Mississauga, Ontario, L4Z 1R9
    email: jchristie@stagevision.com
    www.stagevision.com

     

    Coast to Coast Audio-Visual Services

    This communication is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it.

    Although Stagevision Inc. has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments.

     

    P Please consider the environment before you print this email.