Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
Environment:
Topology > 1 Master and 10 APs.
Troubleshooting :
What are the access points using to discover the controller?
Type "show log system 50" on the controller to see if there are any issues.
discovering using dhcp option 43
What has changed? Did you check the switch to make sure that POE is being supplied? Are you sure that something else did not get assigned the ip address of your access points?
We've had similar erratic behavior from APs when there was PoE but not enough PoE - 12watts for example when the AP needed 21.
The control plane tries to come up and we got incinsistent results until we correct the power output of our switches.
but if ap doesn't get enough power it will be blinking orange right ?
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.