Wired Intelligent Edge

 View Only
Back to discussions
Expand all | Collapse all

[5412Rzl2 - J9851A] Multiple source for SPAN config not working, can't detect ICMP on the destination port.

This thread has been viewed 4 times

  • 1.  [5412Rzl2 - J9851A] Multiple source for SPAN config not working, can't detect ICMP on the destination port.

    Posted Jun 20, 2024 05:36 PM

    Model: 5412Rzl2 - J9851A
    Software Version: KB.16.10.0011

    Are there any configuration for SPAN of multiple source port to 1 destination on this model?
    I've tried service policy mirror but it didn't work well. Upon testing I didn't receive the expected traffic that I want to see on the destination port using Wireshark, which is ICMP.

    I used this configuration and apply the service policy mirror on 2 of the SVIs on the core switch:

    class ipv4 vlan-traffic
    10 match ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
    exit
    mirror 1 port L13
     
    policy mirror all-vlans
    10 class ipv4 vlan-traffic action mirror 1


    Vlan 10
    service-policy all-vlans in ;this line is added to each VLAN
    Vlan 20
    service-policy all-vlans in ;this line is added to each VLAN

    Am I missing something?



    ------------------------------
    - Drex
    ------------------------------


Related Content