Thank you Herman! Update to 6.11.8 is already on the list.
Original Message:
Sent: Jun 04, 2024 09:26 AM
From: Herman Robers
Subject: 6.11.3 - ClearPass - File System Integrity Check - Failure
There seems to be a bug for this (CP-50540) applicable to version 6.11.7; and the message can be safely ignored. You may reach out to TAC to verify this is the issue/case.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Jun 04, 2024 04:25 AM
From: aboehm
Subject: 6.11.3 - ClearPass - File System Integrity Check - Failure
hello guys,
is there any update on this issue? I am running 4 nodes in total on 6.11.7, two of them show the File System Integrity Check: WARNING: file:/var/lib/aide/aide.db.gz
This happened a few weeks after adding the affected nodes to the new cluster after the 6.11 upgrade.
Cheers
Original Message:
Sent: Dec 05, 2023 06:05 PM
From: Komi
Subject: 6.11.3 - ClearPass - File System Integrity Check - Failure
Hi Ariyap,
Thank you for your help. We have two ClearPass are running 6.11.3.253363. One is no error, another is failure. So, I'm not sure what is reason.
This log is from few months ago and happed every day.
Original Message:
Sent: Dec 05, 2023 05:48 PM
From: ariyap
Subject: 6.11.3 - ClearPass - File System Integrity Check - Failure
i have not seen this on CP6.11.6 that i am running.
anyway it is best to run the latest maintenance release. Here is the consolidated release notes for 11.6.x
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
Original Message:
Sent: Dec 04, 2023 01:28 AM
From: Komi
Subject: 6.11.3 - ClearPass - File System Integrity Check - Failure
Hi all,
I just noticed this error is happening every day. I cannot find relevant information. Is this something to be concern about or need upgrade to latest?
ClearPass Version 6.11.3.253363
Source: File System Integrity Check
Level: WARN
Category: Filesystem Integrity Check
Action: Failure
Timestamp Dec 04, 2023 03:31:30 UTC
Description
DBG: md_enable: algorithm 0 not available
WARNING: file:/var/lib/aide/aide.db.gz: gcry_md_enable (gost) failed for 'file:/var/lib/aide/aide.db.gz'
DBG: md_enable: algorithm 0 not available
WARNING: file:/var/lib/aide/aide.db.gz: gcry_md_enable (stribog256) failed for 'file:/var/lib/aide/aide.db.gz'
DBG: md_enable: algorithm 0 not available
WARNING: file:/var/lib/aide/aide.db.gz: gcry_md_enable (stribog512) failed for 'file:/var/lib/aide/aide.db.gz'
I found another similar issue 3 years ago 6.9.2 - File System Integrity Check (ERROR) | Security (arubanetworks.com) bug id is CP‑37640, but it fixed in 6.9.8 Policy Manager (arubanetworks.com).
It still happening on the later version device.
Thanks