Wired

 View Only
last person joined: yesterday 

Expand all | Collapse all

6300 VSF upgrade

This thread has been viewed 24 times
  • 1.  6300 VSF upgrade

    Posted Feb 13, 2023 11:55 AM

    I need to upgrade 6300 VSF stack

    Current  active image is primary

    I am going to do this way:

    • copy image from tftp server to secondary
    • reboot stack using  - boot system secondary

    is there anything else to consider?



  • 2.  RE: 6300 VSF upgrade

    Posted May 17, 2023 02:42 PM

    Make sure you "allow unsafe updates", there might be firmware devices to update as well, you haven't what ver you're currently running and what ver you are upgrading to.

    Phil




  • 3.  RE: 6300 VSF upgrade

    Posted Jun 05, 2023 04:41 PM

    Edi, 

    You can check the images, with the command "show images". 

    I would recommend copying your 'working' image as secondary with the command 'copy primary secondary'

    This will set you're working firmware as secondary and it's logic to have the operating in the primary for me (altough it doesn't matter :) )

    after this you can upload your new firmware to the primary 

    Kr 

    Dylan