Cloud Managed Networks

 View Only
last person joined: yesterday 

Forum to discuss all things Aruba Central and UXI Network Management, this includes Aruba Central managed networks, Central configuration, best practices, Central APIs, Cloud Guest, AIOps, Presence Analytics and Other Central Applications
Expand all | Collapse all

6300m Central ZTP Stacking

This thread has been viewed 10 times
  • 1.  6300m Central ZTP Stacking

    Posted 4 days ago

    Is it possible to ZTP a pair of 6300M switches connected via DAC which are factory default?

    Scenario: 2 x 6300M switches in factory default state. Connected via DAC not using auto stacking ports. ZTP via Central using mgmt ports on each switch. Then configure the stack via Central.

    Or would you connect them via auto stacking ports then ZTP?

    The idea is to have someone onsite racking the switches and patching them in to enable ZTP. Then all config being performed via Central. This is what zero touch should be right?


  • 2.  RE: 6300m Central ZTP Stacking

    Posted 4 days ago
    i would go with the option of auto-stack.

    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.

  • 3.  RE: 6300m Central ZTP Stacking

    Posted 3 days ago
    ZTP doesn't work if you change the config from factory default. Would connecting them via auto stacking ports then try to ZTP work??