Cloud Managed Networks

 View Only
last person joined: 8 hours ago 

Forum to discuss all things related to HPE Aruba Networking Central and UXI Network Management, including deployment of managed networks, configuration, best practices, APIs, Cloud Guest, AIOps, Presence Analytics, and other included Applications
Expand all | Collapse all

6300m Central ZTP Stacking

This thread has been viewed 11 times
  • 1.  6300m Central ZTP Stacking

    Posted Jan 24, 2023 06:06 AM

    Is it possible to ZTP a pair of 6300M switches connected via DAC which are factory default? 

    Scenario: 2 x 6300M switches in factory default state. Connected via DAC not using auto stacking ports. ZTP via Central using mgmt ports on each switch. Then configure the stack via Central.

    Or would you connect them via auto stacking ports then ZTP?

    The idea is to have someone onsite racking the switches and patching them in to enable ZTP. Then all config being performed via Central. This is what zero touch should be right?


  • 2.  RE: 6300m Central ZTP Stacking

    Posted Jan 24, 2023 05:00 PM
    i would go with the option of auto-stack.

    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.

  • 3.  RE: 6300m Central ZTP Stacking

    Posted Jan 25, 2023 08:40 AM
    ZTP doesn't work if you change the config from factory default. Would connecting them via auto stacking ports then try to ZTP work??