Wireless Access

 View Only
last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

7210 controller device image problem

This thread has been viewed 9 times
  • 1.  7210 controller device image problem

    Posted 26 days ago


    I have a 7210 controller in my hand. Switch off the power to the device. When we turned it back on, the device did not turn on. When we control it with the console, it stays on the cpboot screen.  In Osinfo information, we get the following error.

    Partition 0:
    0:0:57151 read failed
        image type: 0
      machine type: 18
              size: 73024448
      build string: ArubaOS version for A72xx (p4build@pr-hpn-build09) (gcc version 4.4.5) #73677 SMP PREEMPT Wed Dec 18 20:50:11 UTC 2019

    Image is signed; verifying checksum...
    Error: Unsupported Algorithm
    signature failed!
      image verify: FAIL

    When we want to format or install a new image, we have the following problem. 

    cpboot> format 0:1
    Format will erase everything on eUSB flash's partition 1
    USB(0):   2 USB Device(s) found
    1 Storage Device(s) found
    Are you sure you want to continue (y/n)?Formatting: start: 385950 size: 771900
    385950 write failed
    386206 write failed
    386462 write failed
    386718 write failed
    386974 write failed
    387230 write failed
    387486 write failed

    Does anyone have any advice on the solution to this issue? 

    Translated with DeepL.com (free version)

  • 2.  RE: 7210 controller device image problem
    Best Answer

    Posted 26 days ago

    Looks like a TAC call to me.

    Dustin Burns

    Lead Mobility Engineer @Worldcom Exchange, Inc.

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022-2023
    If my post was useful accept solution and/or give kudos

  • 3.  RE: 7210 controller device image problem

    Posted 26 days ago

    Thank you.