You may be more successful in getting an answer on the Aruba Instant On community.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 23, 2023 12:57 AM
From: pradeep
Subject: 802.1X Authentication and Dynamic VLAN Assignment with Aruba 1960 switch
I'm testing with Radius authentication (NPS server + AD) and dynamic VLAN assignment for a wired network. User authentication has so far failed on my client machine. I double-checked, and the user credentials are correct. My switch's VLAN settings are provided below. Can somebody assist me if I missed something or if the configurations need to be corrected?
> VLAN
Created VLAN 20 and 30
> VLAN interface configuration
Tagged VLANs: 20,30
Untagged VLAN: 1
> Radius configuration
Enabled "802.1x authentication mode"
Enabled "802.1x accounting mode"
Radius Server IP: 192.168.1.10
Authentication port: 1812
Accounting port: 1813
Server priority: 1
Secret: ########
> Port access control:
Enabled "Admin mode"
> Port configuration (interfaces)
Control mode: Auto
Enabled "VLAN assignment"
PS: This is not a MAC-based authentication.