Question on this statement:
"If there are applicable firmware updates in the new software image, they will be applied during the boot process as long as the timer has not yet expired; if there are no applicable firmware updates or if the timer has expired, the switch will boot normally."Is there a way to check on the progress of the firmware updates during the timer window? If we apply the command - "allow-unsafe-updates" (for, say, 30 minutes) and then proceed with the usual automated "vsx update-software" and there aren't any firmware updates will the system wait for the timer to expire before moving on to the updates (ie: we added 30 extra minutes to our window for no reason PER switch - presuming primary and secondary are updated sequentially.Is there a way to shorten the timer window interactive if there's no firmware updates being applied via show events -a -d hpe-isp?So if we set the timer for 30 windows, run the process and check show events after 5 minutes and see nothing happening, go back and change the timer to 1 minute to speed up the process?
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.