We have a device that acts as a phone home box for some equipment. It only needs to a route/access to our firewall and no other internal VLANs aside from the one it is on. I don't have a test network to work this out so I'm asking here.
I want to have an ACL or ACLs that allow traffic on/in VLAN 400 and also only allows routed traffic from VLAN 400 to one IP on VLAN 110 (10.18.0.1).
But does not affect any other inter-VLAN traffic/routing as we have a few other VLANs that need access to VLAN 110.
VLAN 400
10.4.0.X/24
VLAN 110
10.18.0.x/24
The topology is pretty simple:
Device -> 2650 <-> 5406 <--> Firewall
thank you for any advice or help with my first procuvre ACL,
Andrew
#ACL#5406