It's hard as I can't read spanish, except with translate. The problem is in your client, not in the controller. You should not use password authentication, but client certificates as PEAP is broken and Microsoft (and Google) are making it hard to configure because it is insecure and should not be used anymore.
It would probably be best to work with your Aruba partner or Aruba support to discuss in Spanish to avoid misunderstanding in the translations.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 01, 2023 08:04 PM
From: plasticwand33
Subject: Actualizacion de Controlador Aruba 7005
Hola
Actualmente tengo esta Encriptacion
Esta es la que dejo de funcionar con 22h2 windows 11
agardezco tu ayuda.
Original Message:
Sent: May 01, 2023 08:08 AM
From: Herman Robers
Subject: Actualizacion de Controlador Aruba 7005
Check this and get rid of password/PEAP authentication, move to EAP-TLS ot EAP-TEAP (with TLS) as per Microsoft's Guidance.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Apr 27, 2023 07:20 AM
From: plasticwand33
Subject: Actualizacion de Controlador Aruba 7005
Hola, comento que tenemos un controlador Aruba Modelo Aruba7005 con firmware 6.5.4.3 el cual es antiguo, tenemos problemas con la ultima actualizacion de windows 11 el cual dejo de aceptar las conexion con nombre de usuario y contraseña WPA2 Enterprice, quisiera actualizar el controlador Aruba haber si mejora esta situacion pero no sabemos como ya que no tiene un asistente de actualizacion tememeos perder la configuracion actual, la cual estaba funcionando sin problemas mientras levante una Red adicional con WPA2 P.
Agradezco su ayuda.