Hi,
I am trying to get an aggregated (LACP) port group to work on an IAP-225 and so take advantage of a "potential" 1.3gbps
It is plugging into a HP Procurve switch 2626.
No mater what I do I cannot get an LACP trunk to come up.
The HP switch supports dynamic channel which seems to create an LACP group if a new LACP partner device if plugged in. This doesn't work after plugging in an IPA-225
I have also tried to create a manual LACP group or "trunk" as its called on a HP switch. Plugging in an IAP-225 in this configuration also does not work.
I have made no configuration changes to the IAP-225.
show lacp status always shows: "LACP not configured"
any ideas appreciated.
thanks
Dave