Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
Hi,
Can someone let me know the commands to configure Airwave on the aruba controller which is running on 6.5.
Thanks in advance.
You can use the built in Wizard on a physical controller to do this:
Configuration > Wizards > AirWave
https://www.arubanetworks.com/techdocs/ArubaOS_651x_Web_Help/Content/ArubaFrameStyles/Management_Utilities/AW_Wizard.htm
Or CLI commands :
(Controller-Name) (config) # mgmt-server type amp primary-server <AMP IP>(Controller-Name) (config) # write mem
If you are using an IAP, then the below will also guide you through.
https://community.arubanetworks.com/aruba/attachments/aruba/Controller-lessWLANs/29/1/00003516-1.pdf
Try this: https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=28937
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.