Wireless Access

Hello,

I am planning to update a 7205 controller to 8.10.0.10 and I still have some AP-325s I looked though the release notes and could not find anything in regard to updating the AP 325 with the apflash command is that not required with this AOS release?

Thanks in advanced

MJF

There shouldn't be a need to use the apflash command unless you are troubleshooting with TAC and they instruct you to do so. Upgrade as you normally would.

If you're looking to upgrade to the latest 8.10 version, 8.10.0.11 was released a few days ago.

Hello,

I am planning to update a 7205 controller to 8.10.0.10 and I still have some AP-325s I looked though the release notes and could not find anything in regard to updating the AP 325 with the apflash command is that not required with this AOS release?

Thanks in advanced

MJF

There shouldn't be a need to use the apflash command unless you are troubleshooting with TAC and they instruct you to do so. Upgrade as you normally would.

If you're looking to upgrade to the latest 8.10 version, 8.10.0.11 was released a few days ago.

Hello,

I am planning to update a 7205 controller to 8.10.0.10 and I still have some AP-325s I looked though the release notes and could not find anything in regard to updating the AP 325 with the apflash command is that not required with this AOS release?

Thanks in advanced

MJF

Just to confirm the AP-325 is supported on 8.10.0.11.  The release notes does not mention that.  Page 11.

There shouldn't be a need to use the apflash command unless you are troubleshooting with TAC and they instruct you to do so. Upgrade as you normally would.

If you're looking to upgrade to the latest 8.10 version, 8.10.0.11 was released a few days ago.

Hello,

I am planning to update a 7205 controller to 8.10.0.10 and I still have some AP-325s I looked though the release notes and could not find anything in regard to updating the AP 325 with the apflash command is that not required with this AOS release?

Thanks in advanced

MJF

Yes, the AP-325 is supported in 8.10 including 8.10.0.11.

Just to confirm the AP-325 is supported on 8.10.0.11.  The release notes does not mention that.  Page 11.

There shouldn't be a need to use the apflash command unless you are troubleshooting with TAC and they instruct you to do so. Upgrade as you normally would.

If you're looking to upgrade to the latest 8.10 version, 8.10.0.11 was released a few days ago.

Hello,

I am planning to update a 7205 controller to 8.10.0.10 and I still have some AP-325s I looked though the release notes and could not find anything in regard to updating the AP 325 with the apflash command is that not required with this AOS release?

Thanks in advanced

MJF

Hello,

I am planning to update a 7205 controller to 8.10.0.10 and I still have some AP-325s I looked though the release notes and could not find anything in regard to updating the AP 325 with the apflash command is that not required with this AOS release?

Thanks in advanced

MJF