Wireless Access

 View Only
  • 1.  AOS 8.10.7 LSR GUI AP Group Creation forces UNI-3 169 & 173 Channels

    Posted Nov 02, 2023 03:42 PM
    Edited by vvajpeyi Nov 02, 2023 03:49 PM

    Hello, I am running on 8.10.7 LSR on Mobility. If I try to create a new group, I am forced to enable 169 & 173 at 20MHz. The other stable AP groups enable 36 - 165 at 20MHz.  If I try to go back and uncheck 69 & 73 it won't apply. 

    I have the AOS10 training, I didn't see anywhere that reads 169 & 173 are recommended and valid channels. Am I missing something? I apparently didn't get the memo if 169 & 173 are valid and should be default at 20 MHz. 

    Thanks 



  • 2.  RE: AOS 8.10.7 LSR GUI AP Group Creation forces UNI-3 169 & 173 Channels

    Posted Nov 03, 2023 11:43 AM

    Depending on your country (and country code), channels may or may not be allowed (and indoor/outdoor is also different for most countries).

    With the command 'show ap allowed-channels country-code <your country>' you can check what channels are allowed and with what bandwidths. For example in Netherlands, where I live, channels 169&173 are not allowed:

    (md7005) #show ap allowed-channels country-code NL
    
    Allowed Channels for Country Code "NL" Country "Netherlands"
    ------------------------------------------------------------
    PHY Type                  Allowed Channels
    --------                  ----------------
    2.4GHz (indoor)           1 2 3 4 5 6 7 8 9 10 11 12 13
    5GHz   (indoor)           36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    6GHz   (LP indoor)        1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93
    2.4GHz (outdoor)          1 2 3 4 5 6 7 8 9 10 11 12 13
    5GHz   (outdoor)          100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    2.4GHz 40MHz (indoor)     1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13
    5GHz   40MHz (indoor)     36-40 44-48 52-56 60-64 100-104 108-112 116-120 124-128 132-136 149-153 157-161
    6GHz   40MHz (LP indoor)  1-5 9-13 17-21 25-29 33-37 41-45 49-53 57-61 65-69 73-77 81-85 89-93
    2.4GHz 40MHz (outdoor)    1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13
    5GHz   40MHz (outdoor)    100-104 108-112 116-120 124-128 132-136 149-153 157-161
    5GHz 80MHz   (indoor)     36-48 52-64 100-112 116-128 149-161
    5GHz 80MHz   (outdoor)    100-112 116-128 149-161
    6GHz 80MHz   (LP indoor)  1-13 17-29 33-45 49-61 65-77 81-93
    5GHz 160MHz  (indoor)     36-64 100-128
    5GHz 160MHz  (outdoor)    100-128
    6GHz 160MHz  (LP indoor)  1-29 33-61 65-93
    5GHz (DFS)                52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    support zero-wait-dfs     Yes


    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 3.  RE: AOS 8.10.7 LSR GUI AP Group Creation forces UNI-3 169 & 173 Channels

    Posted Nov 03, 2023 12:41 PM

    Hello, thank you. I am in the AMS domain. I went to system >  profiles > AP > Regular Domain, unchecked 69 & 73 

    Checked the same for RF management




  • 4.  RE: AOS 8.10.7 LSR GUI AP Group Creation forces UNI-3 169 & 173 Channels

    Posted Nov 06, 2023 04:28 AM

    Not sure what the AMS domain is... is that US?

    Also, this probably is easy to resolve if you show it in a live-session, and hard to solve with the limited information we have now. May be best to schedule something with your Aruba partner or Aruba support. It can be as simple as having a different regulatory domain profile applied than the one you configured, but it can be something else as well which requires a more thorough look.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------