Hi Airheads,
I recently deployed the ArubaOS-CX virtual switch (OVA) in my lab (ESXi 6.7) for some TACACS testing.. I'm able to get the switch connected to my external network using an access port, but not using a trunk port. For reference, the upstream device has been configured to allow all VLANs with a PVID of 999 (no routable). VLAN 20 is to be used for switch connectivity on the default VRF. Is there something I'm missing that might apply to the virtual switch specifically? It seems like it's dropping tagged traffic.
Access:
interface 1/1/1
no shutdown
no routing
vlan access 20
interface vlan20
ip address 172.16.10.31/24
ip route 0.0.0.0/0 172.16.10.1
ArubaCX-Lab-SW1# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 100(128) bytes of data.
76 bytes from 8.8.8.8: icmp_seq=1 ttl=115 (truncated)
76 bytes from 8.8.8.8: icmp_seq=2 ttl=115 (truncated)
76 bytes from 8.8.8.8: icmp_seq=3 ttl=115 (truncated)
76 bytes from 8.8.8.8: icmp_seq=4 ttl=115 (truncated)
^C
--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 18.433/19.725/21.600/1.216 ms
Trunk:
vlan 20
name Lab-Data
vlan 999
name VLAN-Drop
interface 1/1/1
no shutdown
no routing
vlan trunk native 999
vlan trunk allowed all
interface vlan20
ip address 172.16.10.31/24
ip route 0.0.0.0/0 172.16.10.1
Aruba-CX-Lab-SW1# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 100(128) bytes of data.
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, 4111ms