I am new to ARUBA products, I am doing a test lab, I have an ArubaOS 126.96.36.199_86650 VMC installed on a hyperv server and I have an APIN0225 terminal that I have configured in campus mode, I installed the evaluation licenses provided by Aruba support for 4 wifi access points but my APIN0225 access point remains in the "2IL" state despite a reset and several restarts, the power led flashes permanently and the access point restarts in a loop :
However, there are 4 licenses available on the VMC:
I do not understand why the license does not activate, can someone help me?Thanks in advance.
Hi, can you give an CLI output of show licenseplease.If there is an R Falg the Controller needs to reboot before License gets active.Reference - https://www.arubanetworks.com/techdocs/CLI-Bank/Content/aos8/sh-license.htmAs a Newbe I can recommend the AirHeads Broadcasting Channel on youtube with an step by step guide - https://www.youtube.com/@AirheadsBroadcasting
You will see a video Series for AOS8.2 and 8.9 on that channel.
Hi,thanks for your answer, the flag is ES for Enabled :
The controller log may show a reason why the AP is not being assigned a license. Run 'show log all 200' on the CLI (SSH/Serial console) to get the latest 200 lines. Best to do that just after the AP booted; and in general you can see there how the AP connects and then why it is rejected.
Thank you for your answer, indeed there is an error message related to the license in the logs but I don't understand what the problem is exactly, the licenses for the VMC were given to me by Aruba support and I Installed everything as instructed by support.
Could you tell me how to proceed?
------------------------------Herman Robers------------------------If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.Original Message:Sent: May 18, 2023 05:02 AMFrom: NOVAGSubject: AP 225 won't license to VMC
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.