Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-275 Mesh Point Topology Parameters "None found"

This thread has been viewed 0 times

  • 1.  AP-275 Mesh Point Topology Parameters "None found"

    Posted Apr 18, 2018 09:24 AM

    I have an AP-275 configured as a Mesh Point in a mesh cluster.  In the 7205 controller, under Monitoring - CONTROLLER - Mesh Nodes - Topology, it is listed under the Mesh Portal in its AP Group, but when I click on it, the Parameters Value that show up for all the other nodes do not show up at all.  Instead it shows "None found."

     

    I have reprovissioned this AP a few times and the Portal is showing all the right Parameters Values.

     

    What am I missing?  Do I have a bad AP?



  • 2.  RE: AP-275 Mesh Point Topology Parameters "None found"

    EMPLOYEE
    Posted Apr 18, 2018 05:25 PM

    You might have a bug.  Please open a TAC case and let us know the result.



  • 3.  RE: AP-275 Mesh Point Topology Parameters "None found"
    Best Answer

    Posted Apr 19, 2018 11:16 AM

    Found the bug.  We had an "&" in the name of the AP.   I took that out and the Parameters and Values came right up. 

     

    Thanks.