Wireless Access

 View Only
last person joined: 23 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-275 Not powering up

This thread has been viewed 2 times

  • 1.  AP-275 Not powering up

    Posted May 19, 2016 02:38 PM

    One of our right AP-275 units is not powering up at all.  I've tried it on two separate PoE switches but get nothing.  I've also tried resetting it with the reset button.  I was getting ready to open it up and troubleshoot and repair it myself.  Anybody with experience working on one of these ap's have any idea what it might be or what I need to look for?



  • 2.  RE: AP-275 Not powering up

    EMPLOYEE
    Posted May 19, 2016 02:43 PM

    The AP-275 requires 802.3at power to work. http://www.arubanetworks.com/assets/ds/DS_AP270Series.pdf

     

     What kind of switch is this?

     

     



  • 3.  RE: AP-275 Not powering up

    Posted May 19, 2016 02:59 PM
    It and the other seven AP-275's are all on an HP2910al-48g PoE switch.
    They've all been running on that same switch for over a year. I tried
    plugging it into other ports on the same switch and also to my HP 8200 PoE
    backbone.

    Wm. Wayne DuBose
    IT Specialist | Angelina College |
    936-633-5330 | wdubose@angelina.edu |


  • 4.  RE: AP-275 Not powering up

    EMPLOYEE
    Posted May 19, 2016 03:07 PM

    It seems like there could be a problem with that specific AP.  I would contact TAC.