Wireless Access

 View Only
last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

AP-345: Enabling 2.4 GHz

This thread has been viewed 8 times
  • 1.  AP-345: Enabling 2.4 GHz

    Posted Apr 11, 2024 04:44 AM

    Dear community!

    This AP seems 2.4 GHz capable, but dual 5 GHz ist enabled instead.

    We need 2.4 band for compatibility reasons, how can it be enabled in the Mobility Controller (v8.10.0.5 LSR)? Option in AP profile doesn't seem to work (see attached screenshot).

    Thanks in advance for your precious help!

  • 2.  RE: AP-345: Enabling 2.4 GHz
    Best Answer

    Posted Apr 11, 2024 04:48 AM

    On the AP Group, Radio, Advanced, you can set the Dual 5GHz mode:

    I think automatic is the default setting, but if you set this to disabled, you should have a 2.4+5GHz setup.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.

  • 3.  RE: AP-345: Enabling 2.4 GHz

    Posted Apr 11, 2024 09:14 AM

    Oh, that's really nice! 

    One more achievement for my network admin career: Mobility Controller is powerful and offers lots of options, through experience you get to use the right one.