Wireless Access

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.

Not sure how you got in that state, but I think it's not 'field recoverable' and the AP has to be replaced. It may be eligible for replacement under warranty.

There is an option to zeroize the AP flash for secure disposal, which brings the AP in an state that cannot be recovered. Possibly that's what happened here, and I believe that it's not covered for free replacement if the AP has been zeroized.

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.

Good day,  Herman,

Thank you for your quickly response.

Have chance to get that ipq807x.ari file?

I think can try, 

in U-Boot,  DHCP (or set IP) and set tftp server with that ipq807x.ari

install that ipq807x.ari can get back the AP-boot . 

The problem is can't get this ipq807x.ari file.

Thank you.

Not sure how you got in that state, but I think it's not 'field recoverable' and the AP has to be replaced. It may be eligible for replacement under warranty.

There is an option to zeroize the AP flash for secure disposal, which brings the AP in an state that cannot be recovered. Possibly that's what happened here, and I believe that it's not covered for free replacement if the AP has been zeroized.

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.

If you have a controller already then you can use the controller as the TFTP target.  Can use DHCP to provision the AP with the controller IP address via DHCP option 43 configuration.

Good day,  Herman,

Thank you for your quickly response.

Have chance to get that ipq807x.ari file?

I think can try, 

in U-Boot,  DHCP (or set IP) and set tftp server with that ipq807x.ari

install that ipq807x.ari can get back the AP-boot . 

The problem is can't get this ipq807x.ari file.

Thank you.

Not sure how you got in that state, but I think it's not 'field recoverable' and the AP has to be replaced. It may be eligible for replacement under warranty.

There is an option to zeroize the AP flash for secure disposal, which brings the AP in an state that cannot be recovered. Possibly that's what happened here, and I believe that it's not covered for free replacement if the AP has been zeroized.

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.

Hi Chulcher, 

Thank you for your answer.

yes, use controller for TFTp target, can boot from ipq807x.ari file.

just try it, but look that file is wrong, and try other all  .ari file, can't boot.

console type is : 

u-boot> u-boot> dhcpBOOTP broadcast 1BOOTP broadcast 2BOOTP broadcast 3*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (990 ms)*** Warning: no boot file name; using 'C0A8780A.img'Using bcm4908_eth-0 deviceTFTP from server 192.168.1.100; our IP address is 192.168.120.10; sending through gateway 192.168.120.1Filename 'C0A8780A.img'.Load address: 0x82000000Loading: *Abortu-boot> setenv serverip 192.168.120.80u-boot> dhcpBOOTP broadcast 1*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (204 ms)*** Warning: no boot file name; using 'C0A8780A.img'Using bcm4908_eth-0 deviceTFTP from server 192.168.120.80; our IP address is 192.168.120.10Filename 'C0A8780A.img'.Load address: 0x82000000Loading: *TFTP error: 'File not found' (1)Not retrying...u-boot> boot_image ipq807x.ariBooting from only image (address 0x00580000, flash offset 0x00580000) ...Uncompressing IMAGE ... DONEDecompression LZMA Image OK!Error locating 94908SV.dtb image/memory = 0x40000000 bytes @ 0x0rdp param1 value 0x2000000 in device tree larger than nvram value 0x1000000. Use device tree value!Appending NVRAM to dtb, ret:0   reserving fdt memory region: addr=0 size=20000   Using Device Tree in place at 0000000000f00000, end 0000000000f048c6Starting kernel ...

is it have chance can get AP-Boot image for Aruba AP?

Thank you.

If you have a controller already then you can use the controller as the TFTP target.  Can use DHCP to provision the AP with the controller IP address via DHCP option 43 configuration.

Good day,  Herman,

Thank you for your quickly response.

Have chance to get that ipq807x.ari file?

I think can try, 

in U-Boot,  DHCP (or set IP) and set tftp server with that ipq807x.ari

install that ipq807x.ari can get back the AP-boot . 

The problem is can't get this ipq807x.ari file.

Thank you.

Not sure how you got in that state, but I think it's not 'field recoverable' and the AP has to be replaced. It may be eligible for replacement under warranty.

There is an option to zeroize the AP flash for secure disposal, which brings the AP in an state that cannot be recovered. Possibly that's what happened here, and I believe that it's not covered for free replacement if the AP has been zeroized.

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.

u-boot> boot_image ipq807x.ari

try bootp ipq807x.ari (and other .ari)  , not right boot file.

u-boot> bootp ipq807x.ariBOOTP broadcast 1*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (203 ms)Using bcm4908_eth-0 deviceTFTP from server 192.168.120.80; our IP address is 192.168.120.10Filename 'ipq807x.ari'.Load address: 0x82000000Loading: #"Synchronous Abort" handler, esr 0x96000046ELR:     3feabcf8LR:      3feb1714x0 : 0000000082000000 x1 : 000000003ea1af1ex2 : 00000000000005bc x3 : 0000000000000000x4 : 0000000082000000 x5 : 0000000000000001x6 : 0000000000000a78 x7 : 0000000000000044x8 : 000000000000000a x9 : 0000000000000002x10: 000000003ff7cbd5 x11: 0000000000000000x12: 00000000fffffffd x13: 00000000ffffffffx14: 000000003ff7e9b0 x15: 00000000ffffffffx16: 00000000585ec33b x17: 00000000e972c55bx18: 000000003ea1cdf0 x19: 000000003ff7e000x20: 00000000000005bc x21: 000000003ff53000x22: 00000000000005bc x23: 000000003ff7f000x24: 000000003ff7f000 x25: 000000003ff7e000x26: 000000003ff7c6d4 x27: 000000003ff7c000x28: 000000003ff7c000 x29: 000000003ea1ae40Resetting CPU ...resetting ...

try booti arm64.ari  (and other arm*.ari) , not right boot file.

u-boot> booti arm64.ari "Synchronous Abort" handler, esr 0x96000021ELR:     3fe6915cLR:      3fe69148x0 : 00000000644d5241 x1 : 0000000000000000x2 : 0000000000000010 x3 : 0000000000000072x4 : 000000003feb2630 x5 : 000000000000000ax6 : 0000000000000002 x7 : 0000000000000044x8 : 0000000000000000 x9 : 0000000000000002x10: 000000003ea1b2c1 x11: 0000000000000000x12: 00000000ffffffff x13: 0000000000000001x14: 000000003ff7c720 x15: 00000000ffffffffx16: 000000002ac0bb8c x17: 00000000487d210dx18: 000000003ea1cdf0 x19: 000000003ff61000x20: 0000000000000001 x21: 000000003ea42338x22: 0000000000000000 x23: 000000003ff535b0x24: 000000000000000a x25: 000000003ea42330x26: 0000000000000000 x27: 0000000000000000x28: 000000003ea42390 x29: 000000003ea1b550Resetting CPU ...resetting ...

Hi Chulcher, 

Thank you for your answer.

yes, use controller for TFTp target, can boot from ipq807x.ari file.

just try it, but look that file is wrong, and try other all  .ari file, can't boot.

console type is : 

u-boot> u-boot> dhcpBOOTP broadcast 1BOOTP broadcast 2BOOTP broadcast 3*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (990 ms)*** Warning: no boot file name; using 'C0A8780A.img'Using bcm4908_eth-0 deviceTFTP from server 192.168.1.100; our IP address is 192.168.120.10; sending through gateway 192.168.120.1Filename 'C0A8780A.img'.Load address: 0x82000000Loading: *Abortu-boot> setenv serverip 192.168.120.80u-boot> dhcpBOOTP broadcast 1*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (204 ms)*** Warning: no boot file name; using 'C0A8780A.img'Using bcm4908_eth-0 deviceTFTP from server 192.168.120.80; our IP address is 192.168.120.10Filename 'C0A8780A.img'.Load address: 0x82000000Loading: *TFTP error: 'File not found' (1)Not retrying...u-boot> boot_image ipq807x.ariBooting from only image (address 0x00580000, flash offset 0x00580000) ...Uncompressing IMAGE ... DONEDecompression LZMA Image OK!Error locating 94908SV.dtb image/memory = 0x40000000 bytes @ 0x0rdp param1 value 0x2000000 in device tree larger than nvram value 0x1000000. Use device tree value!Appending NVRAM to dtb, ret:0   reserving fdt memory region: addr=0 size=20000   Using Device Tree in place at 0000000000f00000, end 0000000000f048c6Starting kernel ...

is it have chance can get AP-Boot image for Aruba AP?

Thank you.

If you have a controller already then you can use the controller as the TFTP target.  Can use DHCP to provision the AP with the controller IP address via DHCP option 43 configuration.

Good day,  Herman,

Thank you for your quickly response.

Have chance to get that ipq807x.ari file?

I think can try, 

in U-Boot,  DHCP (or set IP) and set tftp server with that ipq807x.ari

install that ipq807x.ari can get back the AP-boot . 

The problem is can't get this ipq807x.ari file.

Thank you.

Not sure how you got in that state, but I think it's not 'field recoverable' and the AP has to be replaced. It may be eligible for replacement under warranty.

There is an option to zeroize the AP flash for secure disposal, which brings the AP in an state that cannot be recovered. Possibly that's what happened here, and I believe that it's not covered for free replacement if the AP has been zeroized.

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.

What you have obtained is an engineering prototype, which is developed internally by Aruba and does not have the Aruba OS system installed.
It cannot be upgraded to apboot for use through uboot.

u-boot> boot_image ipq807x.ari

try bootp ipq807x.ari (and other .ari)  , not right boot file.

u-boot> bootp ipq807x.ariBOOTP broadcast 1*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (203 ms)Using bcm4908_eth-0 deviceTFTP from server 192.168.120.80; our IP address is 192.168.120.10Filename 'ipq807x.ari'.Load address: 0x82000000Loading: #"Synchronous Abort" handler, esr 0x96000046ELR:     3feabcf8LR:      3feb1714x0 : 0000000082000000 x1 : 000000003ea1af1ex2 : 00000000000005bc x3 : 0000000000000000x4 : 0000000082000000 x5 : 0000000000000001x6 : 0000000000000a78 x7 : 0000000000000044x8 : 000000000000000a x9 : 0000000000000002x10: 000000003ff7cbd5 x11: 0000000000000000x12: 00000000fffffffd x13: 00000000ffffffffx14: 000000003ff7e9b0 x15: 00000000ffffffffx16: 00000000585ec33b x17: 00000000e972c55bx18: 000000003ea1cdf0 x19: 000000003ff7e000x20: 00000000000005bc x21: 000000003ff53000x22: 00000000000005bc x23: 000000003ff7f000x24: 000000003ff7f000 x25: 000000003ff7e000x26: 000000003ff7c6d4 x27: 000000003ff7c000x28: 000000003ff7c000 x29: 000000003ea1ae40Resetting CPU ...resetting ...

try booti arm64.ari  (and other arm*.ari) , not right boot file.

u-boot> booti arm64.ari "Synchronous Abort" handler, esr 0x96000021ELR:     3fe6915cLR:      3fe69148x0 : 00000000644d5241 x1 : 0000000000000000x2 : 0000000000000010 x3 : 0000000000000072x4 : 000000003feb2630 x5 : 000000000000000ax6 : 0000000000000002 x7 : 0000000000000044x8 : 0000000000000000 x9 : 0000000000000002x10: 000000003ea1b2c1 x11: 0000000000000000x12: 00000000ffffffff x13: 0000000000000001x14: 000000003ff7c720 x15: 00000000ffffffffx16: 000000002ac0bb8c x17: 00000000487d210dx18: 000000003ea1cdf0 x19: 000000003ff61000x20: 0000000000000001 x21: 000000003ea42338x22: 0000000000000000 x23: 000000003ff535b0x24: 000000000000000a x25: 000000003ea42330x26: 0000000000000000 x27: 0000000000000000x28: 000000003ea42390 x29: 000000003ea1b550Resetting CPU ...resetting ...

Hi Chulcher, 

Thank you for your answer.

yes, use controller for TFTp target, can boot from ipq807x.ari file.

just try it, but look that file is wrong, and try other all  .ari file, can't boot.

console type is : 

u-boot> u-boot> dhcpBOOTP broadcast 1BOOTP broadcast 2BOOTP broadcast 3*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (990 ms)*** Warning: no boot file name; using 'C0A8780A.img'Using bcm4908_eth-0 deviceTFTP from server 192.168.1.100; our IP address is 192.168.120.10; sending through gateway 192.168.120.1Filename 'C0A8780A.img'.Load address: 0x82000000Loading: *Abortu-boot> setenv serverip 192.168.120.80u-boot> dhcpBOOTP broadcast 1*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224*** Unhandled DHCP Option in OFFER/ACK: 2*** Unhandled DHCP Option in OFFER/ACK: 224DHCP client bound to address 192.168.120.10 (204 ms)*** Warning: no boot file name; using 'C0A8780A.img'Using bcm4908_eth-0 deviceTFTP from server 192.168.120.80; our IP address is 192.168.120.10Filename 'C0A8780A.img'.Load address: 0x82000000Loading: *TFTP error: 'File not found' (1)Not retrying...u-boot> boot_image ipq807x.ariBooting from only image (address 0x00580000, flash offset 0x00580000) ...Uncompressing IMAGE ... DONEDecompression LZMA Image OK!Error locating 94908SV.dtb image/memory = 0x40000000 bytes @ 0x0rdp param1 value 0x2000000 in device tree larger than nvram value 0x1000000. Use device tree value!Appending NVRAM to dtb, ret:0   reserving fdt memory region: addr=0 size=20000   Using Device Tree in place at 0000000000f00000, end 0000000000f048c6Starting kernel ...

is it have chance can get AP-Boot image for Aruba AP?

Thank you.

If you have a controller already then you can use the controller as the TFTP target.  Can use DHCP to provision the AP with the controller IP address via DHCP option 43 configuration.

Good day,  Herman,

Thank you for your quickly response.

Have chance to get that ipq807x.ari file?

I think can try, 

in U-Boot,  DHCP (or set IP) and set tftp server with that ipq807x.ari

install that ipq807x.ari can get back the AP-boot . 

The problem is can't get this ipq807x.ari file.

Thank you.

Not sure how you got in that state, but I think it's not 'field recoverable' and the AP has to be replaced. It may be eligible for replacement under warranty.

There is an option to zeroize the AP flash for secure disposal, which brings the AP in an state that cannot be recovered. Possibly that's what happened here, and I believe that it's not covered for free replacement if the AP has been zeroized.

Hi,

I got AP-534 from a-Lab, check is lose the AP-boot, 

use console find is boot to U-Boot. (lose the AP-Boot)

in this shell also can't upgarde aruba os.

have Aruba 7008 controller, use  show ap image version , can see ipq807x.ari , but can't get it.

can use command to get ipq807x.ari from controller to local pc?

or can help send this file to me? (8.10 , or 8.11 or any 8 version for this file is ok.) 

I want use this to upgrade boot for the ap, then will have AP-boot, to install/upgrade the aruba ap os.

Thank you.