For 6 GHz to operate please make sure all of the following requirements are met:
- SSID should be WPA3 or Enhanced Open; WPA2/Open networks are unsupported on 6GHz
- Check that 6GHz operations for your regulatory domain is permitted, and the firmware version (DRT to be more specific) includes valid 6 GHz channels for your country.
- Make sure that your AP has enough PoE power, if all LED indicators on the AP are green, you should be good with that; enabling Intelligent Power Management (IPM) may help as well.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Aug 28, 2024 02:41 AM
From: DiskuTier
Subject: AP 655 cannot see the 6G
Hi @leo.ma,
i have the same problem. how exactly did you activate it?
Original Message:
Sent: Jul 30, 2024 11:56 AM
From: leo.ma
Subject: AP 655 cannot see the 6G
oops, sorry,I don't open wpa3 and vap 6G allow, than i open it,that ok,thanks
------------------------------
If my post was useful, please Accept Solution and Give Kudos.
leo ma
ACMX
Original Message:
Sent: Jul 30, 2024 09:52 AM
From: chulcher
Subject: AP 655 cannot see the 6G
Do you have a WLAN operational on 6 GHz?
------------------------------
Carson Hulcher, ACEX#110
Original Message:
Sent: Jul 30, 2024 04:20 AM
From: leo.ma
Subject: AP 655 cannot see the 6G
Hi friends
I'm conducting a test using AC + AP655, but I can't see 6G. Why is that?
AC 7005-US :8.12.0.1
------------------------------
leo ma
ACMX#1500
------------------------------