@garryshtern wrote:
Confirmed:
#show rf arm-profile ts-arm
Adaptive Radio Management (ARM) profile "ts-arm"
------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels a-only
garryshtern,
I did a quick test on my setup and here is what I observer
(master) (config) #show rf arm-profile default
Adaptive Radio Management (ARM) profile "default"
-------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels a-only
AP on channel 6
Active AP Table
---------------
Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRP
---- ----- ---------- ----------- -------------------
RAP105 rap 2.2.2.1 0 AP:HT:6/9/22.5 0
I changed the 40-MHz allowed bands to "All"
(master) (Adaptive Radio Management (ARM) profile "default") #40MHz-allowed-bands All
(master) (Adaptive Radio Management (ARM) profile "default") #exit
(acmx-master) (config) #show rf arm-profile default
Adaptive Radio Management (ARM) profile "default"
-------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels All
And as soon as I changed this, the AP got the following channel (7+)
Active AP Table
---------------
Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRPOuter IP
---- ----- ---------- ----------- ------------------- -----------
RAP105 rap 2.2.2.1 0 AP:HT:7+/9/22.5
Can you please confirm that none of the ARM profiles have this setting as "All / g-only"
Quick way to do this would be
(acmx-master) (config) #show rf arm-profile default
Adaptive Radio Management (ARM) profile "default"
-------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels All
Thanks,