I have an issue here people. This is the first time I have ever experienced this issue. I have an AP that drops signal every 5 minutes and then begins broadcasting 10 seconds after the drop. I have configured a 105 and a 135 AP at this location and both of them do the exact same thing. I did not bring these AP's from anywhere else...... they are brand new.
My switch at this location is a Cisco 3750. Once logged into the switch and terminal monitor is on, I do not see the connectivity dropping at all once the SSID's stop broadcasting. At first, I thought it was the switch or maybe a port on it, but there are other devices that are plugged up to it that do not experience this issue. I changed ports and still have this issue. Now, I cannot physically go back right now and do any work to any of the devices becasue this is one of our remote locations.
When this drop out happens, I dont notice any connectivity disruption on the controller as it relates to that AP.
Any information on what may be happeninig or how to remedy this issue will be greatly appreciated.
Thanks much.....