Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

AP225 Mesh setup

This thread has been viewed 8 times
  • 1.  AP225 Mesh setup

    Posted Dec 08, 2023 09:50 AM

    I have acquired multiple AP-225 units and was trying to set up a MESH but unable to get any additional devices to show up on MESH devices. Any help is appreciated.

  • 2.  RE: AP225 Mesh setup

    Posted Dec 08, 2023 10:50 AM

    What is your setup? Controller? Instant? Central?

    What software/firmware versions?

    What is your (mesh) configuration?

    Do all the mesh APs show up in the controller/VC/Central?

    What do you see in the logs?

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.