No it's not! Will test tomorrow to create different 6G SSID w/ WPA3..
Original Message:
Sent: Mar 14, 2023 10:24 AM
From: DB86
Subject: AP615 (fw 8.11.0.1) cannot enable 6ghz...
Is the SSID configured to use WPA3 encryption. This is a pre-req.
------------------------------
Dustin Burns
Lead Mobility Engineer @Worldcom Exchange, Inc.
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022-2023
If my post was useful accept solution and/or give kudos
Original Message:
Sent: Mar 14, 2023 10:16 AM
From: JL24
Subject: AP615 (fw 8.11.0.1) cannot enable 6ghz...
Both radios are in access mode.
------------------------------
Jori Luoto
Original Message:
Sent: Mar 14, 2023 09:54 AM
From: DB86
Subject: AP615 (fw 8.11.0.1) cannot enable 6ghz...
Have you checked to see what mode it is set to? Monitor mode, Spectrum mode, or access?
------------------------------
Dustin Burns
Lead Mobility Engineer @Worldcom Exchange, Inc.
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022-2023
If my post was useful accept solution and/or give kudos
Original Message:
Sent: Mar 14, 2023 07:01 AM
From: JL24
Subject: AP615 (fw 8.11.0.1) cannot enable 6ghz...
Hi,
How do I enable 6ghz radio to AP615?
In Configuration menu in AP Config -> Radio I have changed Flexible dual radio to 5G/6G and all SSID's (Networks) I have enabled RF Band 6GHz plus there is default RF profile for 6GHz and 6GHz led stays off...
I have tested ap also in "normal" mode (2.4/5G) and both radios will come up no problem. Flex dual mode 2.4/6G gives me only 2.4...
Any ideas how to proceed??
------------------------------
Jori Luoto
------------------------------