Try the following command to get the ap system status and the (re)boot reason of the AP on a controller:
(md7005) #show ap debug system-status ap-name NLPD-AP325-AirMon | include boot
Reboot Information
AP rebooted Mon Dec 5 11:11:14 CET 2022; SAPD: Reboot after successful image upgrade
Rebootstrap Information
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Dec 06, 2022 01:46 PM
From: Peter Abene
Subject: APs Rebooting
What are some reasons that a group of APs would reboot? They all reside on same switch, APs are joined to controller running 8.6.
------------------------------
Peter
------------------------------