I would not know... probably the best is to check with TAC, or just test it. Not sure if it is supported.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 18, 2022 06:05 AM
From: Pavan Kumar Potru
Subject: ARP and DHCP Inspection on UBT Mode
Thanks Herman.
If we have to apply on both switch (Customer's security requirement) and controller,
On switch - trusting uplink port and Tunnel-Reserved-Vlan be enough ?
On Controller - Will configure as normal. Uplink trunk and uplink vlans as trust.
------------------------------
Pavan Potru
Original Message:
Sent: Jan 18, 2022 05:27 AM
From: Herman Robers
Subject: ARP and DHCP Inspection on UBT Mode
I would think you should enable those features on the controller/gateway, as with UBT all traffic is handled there.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Jan 17, 2022 06:29 AM
From: Pavan Kumar Potru
Subject: ARP and DHCP Inspection on UBT Mode
Hi,
Trying to implement DHCP and ARP snooping on AOS switches with UBT mode on. Will enabling these features on Tunnel-Reserved-Vlan on access switches be enough for all UBT vlans that reside on the core side?
Thanks,
Pavan.
------------------------------
Pavan Kumar Potru
------------------------------