Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

Aruba 1930 error mode on cisco port

This thread has been viewed 6 times
  • 1.  Aruba 1930 error mode on cisco port

    Posted Sep 16, 2022 08:53 AM
    hi everyone,

    aruba 1930 switch is connected directly on cisco and the link keeps going up and down dropping packets due to this instability.

    what configs should be applied on each to stabilize the situation?


  • 2.  RE: Aruba 1930 error mode on cisco port

    Posted Sep 16, 2022 10:43 AM
    Please ask questions about the 1930 Instant ON switches on the Aruba Instant ON forum. It would be advisable that you provide logs there from both switches, as the reason may be found in there.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.