Hi, I have a Linksys 1920 setup in bridge mode so I can use it for whole house VPN. It is connected to a linksys velops that handle my wifi. Works OK but I have issues in some rooms and can't get a signal to my detached garage or outdoor cameras that is stable.I purchased 2 aruba 303H APs in the hopes that it would be easy to connect as wifi extenders to push my velop signalthrough a window to the outside world so to speak and if I leave one in the house and one in the garage i'd want it to make the house signal a bit stronger.I cannot get it to connect as easy as they say. It keeps wanting to leave the aruba as a separate network SSID.
I can use my other SSID but still see the aruba as SETMEUP when I do a network search and when I think I have it connected it says ithas no internet connection.I can see that when I log into it it has a IP address from my router.Is there an easy video somewhere I can follow for this? I'm not that network savvy with all these terms and don't really understand DHCP and the like.I'd even be happy if I could just use the 2 aruba's without the velops if they would work as i need them to.Thanks.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.