oh AP-207 (JX952A) is not Instant AP and can not join an Instant AP cluster.
for AP-207 (JX952A), you need an Aruba controller.
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------
Original Message:
Sent: May 18, 2023 04:32 AM
From: ashata
Subject: Aruba 505 Unified AP and AP-207
as my information AP-207 (JX952A) , without WebUI. The last firmware I found in ASP Oct 2017
https://asp.arubanetworks.com/downloads;search=JX952A;products=Aruba%20Access%20Points
How can i fix this issue ?
Thanks in advance
Original Message:
Sent: May 18, 2023 04:21 AM
From: ariyap
Subject: Aruba 505 Unified AP and AP-207
connect the AP-207 to an isolated VLAN, separate from the other APs,
then through the webUI upgrade it to the same version of your other APs.
after that, you can add AP-207 to the same VLAN as the other APs and it will join the cluster.
you can download the firmware from ASP
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
Original Message:
Sent: May 18, 2023 02:03 AM
From: ashata
Subject: Aruba 505 Unified AP and AP-207
Hi Sir.
yes. this is a new deployment. and APs diffrent firmware.
How can I upgrade AP-207 Firmware (JX952A) as the AP make restart every 5 min ( i think because can't find the controller )?
Regrds.
Original Message:
Sent: May 18, 2023 01:41 AM
From: ariyap
Subject: Aruba 505 Unified AP and AP-207
is this a new deployment and do both the APs have the same firmware version?
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
Original Message:
Sent: May 17, 2023 04:55 AM
From: ashata
Subject: Aruba 505 Unified AP and AP-207
Dear Sir,
Good Day.
We have one Access Point Aruba 505 Unified AP (R2H25A) working as Virtual Controller. and another access point AP-207 (JX952A).
Access point 207 does not appear in the virtual controller dashboard and both of them are in the same subnet.
can you support fixing this issue, please?
thanks in advance