Aruba Airwave

 View Only
last person joined: yesterday 

Expand all | Collapse all

Aruba - Radius Server - Static Routes

This thread has been viewed 11 times
  • 1.  Aruba - Radius Server - Static Routes

    Posted May 03, 2024 02:49 PM

    Hi there

    how do I change or submit a static route on our Airwave Server. Currently our vlan cannot access the appliance from the network but it can from others.
    Our default gateway should be
    the vlan gateway is
    I do not recall statically assigning the network.Also, I cannot get the airwave server to authenticate to our radius server. I want to use my domain credentials to log in.
    Any assistance would be fantastic.

    4 Static Routes

  • 2.  RE: Aruba - Radius Server - Static Routes

    Posted May 24, 2024 09:08 AM

    I don't think you can add/change static routes. If you add a route on your gateway to the destination, it may redirect traffic and allow communications.

    Not sure if TAC may be able to add static routes for you, but you could ask.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.