Aruba Airwave

 View Only
last person joined: yesterday 

Expand all | Collapse all

Aruba 8.3.0.2 - Radius Server - Static Routes

This thread has been viewed 11 times
  • 1.  Aruba 8.3.0.2 - Radius Server - Static Routes

    Posted May 03, 2024 02:49 PM

    Hi there

    how do I change or submit a static route on our Airwave Server. Currently our vlan cannot access the appliance from the network but it can from others.
    Our default gateway should be 172.27.1.2
    the vlan 172.18.1.0/24 gateway is 172.18.1.252
    I do not recall statically assigning the 172.17.0.0 network.Also, I cannot get the airwave server to authenticate to our radius server. I want to use my domain credentials to log in.
    Any assistance would be fantastic.

    NETWORK  SUBNET MASK GATEWAY
    0.0.0.0 0.0.0.0 172.18.1.252
    169.254.0.0 255.255.0.0 0.0.0.0
    172.17.0.0 255.255.0.0 0.0.0.0
    172.18.1.0 255.255.255.0 0.0.0.0
    4 Static Routes


  • 2.  RE: Aruba 8.3.0.2 - Radius Server - Static Routes

    EMPLOYEE
    Posted 29 days ago

    I don't think you can add/change static routes. If you add a route on your gateway 172.18.1.252 to the destination, it may redirect traffic and allow communications.

    Not sure if TAC may be able to add static routes for you, but you could ask.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------