Yeah, it doesn't say 64xx is supported on the script but since it's AOS-CX the script might still work on 64xx switches. I think you should give it a try. Because i made it work on a virtual CX switch.
Original Message:
Sent: Jun 18, 2024 07:12 PM
From: alight4
Subject: Aruba 8320 IP-SLA and Route changing
Hello,
Thanks for getting back to me.
Unfortunately the 'Connectivity Monitor' script does not exist within the ASE list on the 6405.
Original Message:
Sent: Jun 16, 2024 06:57 AM
From: kayhan
Subject: Aruba 8320 IP-SLA and Route changing
It should be possible to do this with a 6405 switch. They support NAE.
Original Message:
Sent: Jun 11, 2024 06:38 PM
From: alight4
Subject: Aruba 8320 IP-SLA and Route changing
Is this possible to do with Aruba 6405 switch series?
I don't see the ability to install that script on those model, as was demonstrated in the document.
Thank you,
Alex
Original Message:
Sent: Feb 22, 2023 11:58 AM
From: Artolex
Subject: Aruba 8320 IP-SLA and Route changing
This worked beautifully, thank you very much!
Original Message:
Sent: Feb 21, 2023 11:10 AM
From: Ivan ivan.bondar@hpe.com
Subject: Aruba 8320 IP-SLA and Route changing
Hi,
There is much more powerful mechanism in AOS-CX called NAE. This thread contains an example similar to your query - https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=30466
------------------------------
Ivan Bondar
Original Message:
Sent: Feb 20, 2023 02:43 PM
From: Artolex
Subject: Aruba 8320 IP-SLA and Route changing
Hello, i've got an 8320 where i would like to change the default 0.0.0.0/0 route depending on the ip-sla result, just like tracking in cisco, is there any way to do this in this switch without third party apps?