Wireless Access

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

Hi Mustafa,

first of all it is the decission by the Client to which band it is connected. Are those new Clients dual Band clients?
Is Band Steering / Steering Mode enabled?

Can you give an output of 
show ap bss-table ap-name <APNAME>
show wlan virtual-ap <PROFILENAME>

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

Hi Cordless, 

Sorry for the late reply I was out of office for couple of days. Here is what you requested : 

(WLC-ARUBA-TELEMTRY) [mynode] #show ap bss-table ap-name AP15-5038

fm (forward mode): T-Tunnel, S-Split, D-Decrypt Tunnel, B-Bridge (s-standard, p-persistent, b-backup, a-always), n-anyspot

cluster (cluster role): U-UAC, A-AAC, sU-Standby UAC, sA-Standby AAC

Aruba AP BSS Table
------------------
bss                ess                    port  ip           band/ht-mode/bandwidth  ch/EIRP/max-EIRP  type  cur-cl  ap name    in-t(s)  tot-t          mtu   acl-state  acl  fm  flags  cluster  datazone
---                ---                    ----  --           ----------------------  ----------------  ----  ------  -------    -------  -----          ---   ---------  ---  --  -----  -------  --------
b0:1f:8c:89:2b:40  Telemetry              N/A   10.1.226.71  2.4GHz/HE/20MHz         11/7.0/25.2       ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          94   T   T               no
b0:1f:8c:89:2b:52  Telemetry Guest        N/A   10.1.226.71  5GHz/HE/80MHz           157E/15.0/31.7    ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          94   T   T               no
b0:1f:8c:89:2b:42  Telemetry Guest        N/A   10.1.226.71  2.4GHz/HE/20MHz         11/7.0/25.2       ap    1       AP15-5038  0        47d:7h:3m:20s  1500  -          94   T   T               no
b0:1f:8c:89:2b:50  Telemetry              N/A   10.1.226.71  5GHz/HE/80MHz           157E/15.0/31.7    ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          94   T   T               no
b0:1f:8c:89:2b:43  Fakeeh-Concent-Tablet  N/A   10.1.226.71  2.4GHz/HE/20MHz         11/7.0/25.2       ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          92   T   T               no
b0:1f:8c:89:2b:51  Fakeeh Care            N/A   10.1.226.71  5GHz/HE/80MHz           157E/15.0/31.7    ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          99   T   T               no
b0:1f:8c:89:2b:41  Fakeeh Care            N/A   10.1.226.71  2.4GHz/HE/20MHz         11/7.0/25.2       ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          99   T   T               no
b0:1f:8c:89:2b:53  Fakeeh-Concent-Tablet  N/A   10.1.226.71  5GHz/HE/80MHz           157E/15.0/31.7    ap    0       AP15-5038  0        47d:7h:3m:20s  1500  -          92   T   T               no

Channel followed by "*" indicates channel selected due to unsupported configured channel.
"Spectrum" followed by "^" indicates Local Spectrum Override in effect.

Num APs:8
Num Associations:1

Flags:       a = Airslice policy; A = Airslice app monitoring; c = MBO Cellular Data Capable BSS; d = Deferred Delete Pending; D = VLAN Discovered; E = Enhanced-open BSS without transition mode; I = Imminent VAP Down; K = 802.11K Enabled; m = Agile Multiband (MBO) BSS; M = WPA3-SAE mixed mode BSS; o = Enhanced-open transition mode open BSS; O = Enhanced-open BSS with transition mode; r = 802.11r Enabled; t = Broadcast TWT Enabled; T = Individual TWT Enabled; W = 802.11W Enabled; x = MBSSID Tx BSS; 3 = WPA3 BSS;

The device I'm looking for is not connecting to this AP even though the device is setup to be connected only to 5hz and the in the same room. Actually the device is connecting to another AP far away. 

=================================================================================

(WLC-ARUBA-TELEMTRY) [mynode] #show wlan virtual-ap Telemetry

Virtual AP profile "Telemetry"
------------------------------
Parameter                                          Value
---------                                          -----
AAA Profile                                        Telemetry_aaa_prof
802.11k Profile                                    default
Hotspot 2.0 Profile                                default
Virtual AP enable                                  Enabled
VLAN                                               161
Forward mode                                       tunnel
SSID Profile                                       Telemetry_ssid_prof
Allowed band                                       all
Allowed 5G radio                                   all
Allow 6GHz band                                    Disabled
Disable 6GHz vap for mesh                          Disabled
Band Steering                                      Enabled
Cellular handoff assist                            Disabled
Openflow Enable                                    Enabled
Fine Timing Measurement (802.11mc) Responder Mode  Disabled
Steering Mode                                      prefer-5ghz
Dynamic Multicast Optimization (DMO)               Disabled
Dynamic Multicast Optimization (DMO) Threshold     6
Drop Broadcast and Multicast                       Disabled
Convert Broadcast ARP requests to unicast          Enabled
Authentication Failure Denylist Time               3600 sec
Denylist Time                                      3600 sec
Deny inter user traffic                            Disabled
Deny time range                                    N/A
DoS Prevention                                     Disabled
HA Discovery on-association                        Enabled
Mobile IP                                          Enabled
Preserve Client VLAN                               Disabled
Remote-AP Operation                                standard
Station Denylisting                                Enabled
Strict Compliance                                  Disabled
VLAN Mobility                                      Enabled
WAN Operation mode                                 always
FDB Update on Assoc                                Disabled
Pure UAC BSS Deferred Deletion Delay               10 min
WMM Traffic Management Profile                     N/A
Anyspot profile                                    N/A

===========================================================================

Below is an access point connecting thru 5g to the Telemetry device with ip 10.1.161.25 

(WLC-ARUBA-TELEMTRY) [mynode] #show ap bss-table ap-name AP15-5044

fm (forward mode): T-Tunnel, S-Split, D-Decrypt Tunnel, B-Bridge (s-standard, p-persistent, b-backup, a-always), n-anyspot

cluster (cluster role): U-UAC, A-AAC, sU-Standby UAC, sA-Standby AAC

Aruba AP BSS Table
------------------
bss                ess                    port  ip           band/ht-mode/bandwidth  ch/EIRP/max-EIRP  type  cur-cl  ap name    in-t(s)  tot-t           mtu   acl-state  acl  fm  flags  cluster  datazone
---                ---                    ----  --           ----------------------  ----------------  ----  ------  -------    -------  -----           ---   ---------  ---  --  -----  -------  --------
b0:1f:8c:85:e7:42  Telemetry Guest        N/A   10.1.226.70  2.4GHz/HE/20MHz         1/9.0/27.0        ap    1       AP15-5044  0        55d:23h:45m:0s  1500  -          94   T   T               no
b0:1f:8c:85:e7:50  Telemetry              N/A   10.1.226.70  5GHz/HE/80MHz           36E/15.0/31.7     ap    1       AP15-5044  0        55d:23h:45m:0s  1500  -          94   T   T               no
b0:1f:8c:85:e7:40  Telemetry              N/A   10.1.226.70  2.4GHz/HE/20MHz         1/9.0/27.0        ap    0       AP15-5044  0        55d:23h:45m:0s  1500  -          94   T   T               no
b0:1f:8c:85:e7:52  Telemetry Guest        N/A   10.1.226.70  5GHz/HE/80MHz           36E/15.0/31.7     ap    0       AP15-5044  0        55d:23h:45m:0s  1500  -          94   T   T               no
b0:1f:8c:85:e7:41  Fakeeh Care            N/A   10.1.226.70  2.4GHz/HE/20MHz         1/9.0/27.0        ap    0       AP15-5044  0        55d:23h:45m:0s  1500  -          99   T   T               no
b0:1f:8c:85:e7:53  Fakeeh-Concent-Tablet  N/A   10.1.226.70  5GHz/HE/80MHz           36E/15.0/31.7     ap    0       AP15-5044  0        55d:23h:45m:0s  1500  -          92   T   T               no
b0:1f:8c:85:e7:43  Fakeeh-Concent-Tablet  N/A   10.1.226.70  2.4GHz/HE/20MHz         1/9.0/27.0        ap    0       AP15-5044  0        55d:23h:45m:0s  1500  -          92   T   T               no
b0:1f:8c:85:e7:51  Fakeeh Care            N/A   10.1.226.70  5GHz/HE/80MHz           36E/15.0/31.7     ap    0       AP15-5044  0        55d:23h:45m:0s  1500  -          99   T   T               no

Channel followed by "*" indicates channel selected due to unsupported configured channel.
"Spectrum" followed by "^" indicates Local Spectrum Override in effect.

Num APs:8
Num Associations:2

Flags:       a = Airslice policy; A = Airslice app monitoring; c = MBO Cellular Data Capable BSS; d = Deferred Delete Pending; D = VLAN Discovered; E = Enhanced-open BSS without transition mode; I = Imminent VAP Down; K = 802.11K Enabled; m = Agile Multiband (MBO) BSS; M = WPA3-SAE mixed mode BSS; o = Enhanced-open transition mode open BSS; O = Enhanced-open BSS with transition mode; r = 802.11r Enabled; t = Broadcast TWT Enabled; T = Individual TWT Enabled; W = 802.11W Enabled; x = MBSSID Tx BSS; 3 = WPA3 BSS;

Is there a possibility the issue from the OS ver ? 

Original Message:
Sent: May 27, 2024 07:41 AM
From: cordless
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi Mustafa,

first of all it is the decission by the Client to which band it is connected. Are those new Clients dual Band clients?
Is Band Steering / Steering Mode enabled?

Can you give an output of 
show ap bss-table ap-name <APNAME>
show wlan virtual-ap <PROFILENAME>

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

any response please ? 

Original Message:
Sent: May 27, 2024 07:41 AM
From: cordless
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi Mustafa,

first of all it is the decission by the Client to which band it is connected. Are those new Clients dual Band clients?
Is Band Steering / Steering Mode enabled?

Can you give an output of 
show ap bss-table ap-name <APNAME>
show wlan virtual-ap <PROFILENAME>

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

For more instant responses, please open a TAC case.

I see channel 157E assigned, which may not be compatible with some devices. You may also have set a client limit per AP, but I believe minimum value is 32 clients per AP, which does not explain this on a close-to-empty AP. TAC may be able to check your logs and see what makes clients not connect.

Upgrading to a recent firmware version in general doesn't hurt, but it's just a lucky shot. TAC may suggest to upgrade to a recent version as it fixes other thing and rules out a few things.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------

Original Message:
Sent: Jun 10, 2024 04:50 AM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

any response please ? 

Original Message:
Sent: May 27, 2024 07:41 AM
From: cordless
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi Mustafa,

first of all it is the decission by the Client to which band it is connected. Are those new Clients dual Band clients?
Is Band Steering / Steering Mode enabled?

Can you give an output of 
show ap bss-table ap-name <APNAME>
show wlan virtual-ap <PROFILENAME>

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

Hi Herman, 

Thanks for your reply, I will review our options for upgrading as just recently upgraded to 8.10.0.0.8 LSR. 

and I see our only option now is to open TAC case. 

Appreciate your support. 

Original Message:
Sent: Jun 10, 2024 07:08 AM
From: Herman Robers
Subject: Aruba AP-515 not broadcasting 5Ghz

For more instant responses, please open a TAC case.

I see channel 157E assigned, which may not be compatible with some devices. You may also have set a client limit per AP, but I believe minimum value is 32 clients per AP, which does not explain this on a close-to-empty AP. TAC may be able to check your logs and see what makes clients not connect.

Upgrading to a recent firmware version in general doesn't hurt, but it's just a lucky shot. TAC may suggest to upgrade to a recent version as it fixes other thing and rules out a few things.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.

Original Message:
Sent: Jun 10, 2024 04:50 AM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

any response please ? 

Original Message:
Sent: May 27, 2024 07:41 AM
From: cordless
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi Mustafa,

first of all it is the decission by the Client to which band it is connected. Are those new Clients dual Band clients?
Is Band Steering / Steering Mode enabled?

Can you give an output of 
show ap bss-table ap-name <APNAME>
show wlan virtual-ap <PROFILENAME>

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

You might want to get that version of code up to 8.10.0.11LSR (mind the firewall opps as well); the reason is that there are a mass load of bug-fixes and kernel crash issues with 8.10.0.7LSR and 8.10.0.8LSR.  Check out the release notes; I think that I counted 16 bug fixes with that one model of AP alone.

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

I will check the release notes thanks for the heads up. for the mean time we still facing this issue. 

Original Message:
Sent: May 28, 2024 03:50 AM
From: m.eaves@ed.ac.uk
Subject: Aruba AP-515 not broadcasting 5Ghz

You might want to get that version of code up to 8.10.0.11LSR (mind the firewall opps as well); the reason is that there are a mass load of bug-fixes and kernel crash issues with 8.10.0.7LSR and 8.10.0.8LSR.  Check out the release notes; I think that I counted 16 bug fixes with that one model of AP alone.

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

Would be interesting to get the mgmt-frames output when the second device is trying to connect to the AP.

#show ap remote debug mgmt-frames ap-name AP15-5044

This will give us some more details whether the device tried to connect to 5 GHz but was denied by the AP

Regards, Sajin
ACMX, ACX-CA

Original Message:
Sent: Jun 02, 2024 09:41 AM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

I will check the release notes thanks for the heads up. for the mean time we still facing this issue. 

Original Message:
Sent: May 28, 2024 03:50 AM
From: m.eaves@ed.ac.uk
Subject: Aruba AP-515 not broadcasting 5Ghz

You might want to get that version of code up to 8.10.0.11LSR (mind the firewall opps as well); the reason is that there are a mass load of bug-fixes and kernel crash issues with 8.10.0.7LSR and 8.10.0.8LSR.  Check out the release notes; I think that I counted 16 bug fixes with that one model of AP alone.

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

Hi Sajinnair, 

I have opened a TAC support with Aruba and will start troublshooting this issue to find out the logs and solve this issue. 

Original Message:
Sent: Jun 19, 2024 05:19 PM
From: sajinnair
Subject: Aruba AP-515 not broadcasting 5Ghz

Would be interesting to get the mgmt-frames output when the second device is trying to connect to the AP.

#show ap remote debug mgmt-frames ap-name AP15-5044

This will give us some more details whether the device tried to connect to 5 GHz but was denied by the AP

Regards, Sajin
ACMX, ACX-CA

Original Message:
Sent: Jun 02, 2024 09:41 AM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

I will check the release notes thanks for the heads up. for the mean time we still facing this issue. 

Original Message:
Sent: May 28, 2024 03:50 AM
From: m.eaves@ed.ac.uk
Subject: Aruba AP-515 not broadcasting 5Ghz

You might want to get that version of code up to 8.10.0.11LSR (mind the firewall opps as well); the reason is that there are a mass load of bug-fixes and kernel crash issues with 8.10.0.7LSR and 8.10.0.8LSR.  Check out the release notes; I think that I counted 16 bug fixes with that one model of AP alone.

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa

Sounds great - thank you for the update

------------------------------
Regards, Sajin
ACMX, ACX-CA
------------------------------

Original Message:
Sent: Jun 26, 2024 03:35 AM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi Sajinnair, 

I have opened a TAC support with Aruba and will start troublshooting this issue to find out the logs and solve this issue. 

Original Message:
Sent: Jun 19, 2024 05:19 PM
From: sajinnair
Subject: Aruba AP-515 not broadcasting 5Ghz

Would be interesting to get the mgmt-frames output when the second device is trying to connect to the AP.

#show ap remote debug mgmt-frames ap-name AP15-5044

This will give us some more details whether the device tried to connect to 5 GHz but was denied by the AP

Regards, Sajin
ACMX, ACX-CA

Original Message:
Sent: Jun 02, 2024 09:41 AM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

I will check the release notes thanks for the heads up. for the mean time we still facing this issue. 

Original Message:
Sent: May 28, 2024 03:50 AM
From: m.eaves@ed.ac.uk
Subject: Aruba AP-515 not broadcasting 5Ghz

You might want to get that version of code up to 8.10.0.11LSR (mind the firewall opps as well); the reason is that there are a mass load of bug-fixes and kernel crash issues with 8.10.0.7LSR and 8.10.0.8LSR.  Check out the release notes; I think that I counted 16 bug fixes with that one model of AP alone.

Original Message:
Sent: May 25, 2024 07:02 PM
From: Mosty85
Subject: Aruba AP-515 not broadcasting 5Ghz

Hi 

I have an issue where a connected 5ghz devices keep connecting to 5g ssid but once a new device came to connect it cannot connect to 5hz network and only 2.4g is connecting. The only work around I found for this issue is to shut and restart the port from the network switch which restart the access point and I can connect new devices. Kindly help me with this issue. 

We use Aruba controller 7030 with version OS 8.10.0.8 LSR 

AP-515

connected to cisco c2960x access switch 

Thanks 

Mustafa