Also worth mentioning for those of you using Cisco CDP and not LLDP.
Depending on the cisco switch, in order to provide more power to an AP, like the 535, the command "power-inline port 2-event" can be applied to the interface. This command provides 802.3at 30w power to a class 4 device and remains that way unless negotiated lower.
Without the command, the default of 802.3af 15.4w power is supplied to any device connected not using CDP. The AP-535 will come up on the controller with 802.3af, but none of the radios will be broadcasting.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.