Wireless Access

 View Only
  • 1.  Aruba Controller administrator access with AD credentials

    Posted Sep 25, 2023 09:59 AM

    Hi,

    I use 6.4.4.6 version controller,

    Is it possible to integrate a RADIUS server for controller login, using my AD username and password in the GUI?



  • 2.  RE: Aruba Controller administrator access with AD credentials

    Posted Sep 25, 2023 10:35 AM

    Yes it is possible.

    You have to Create the RADIUS Authentication with AD as source under:
    Configuration > Security > Authentication

    If you are using LDAP, then configure the necessary parameters on LDAP Server

    If you are using NPAS , then configure the necessary parameters on RADIUS Server

    After that, as step two, navigate to:
    Configuration > Security > Authentication > Server > Server Group 

    Create a server group and select the above created Server (Either RADIUS or LDAP)

    After you finish the steps mentioned above, navigate to:

    Configuration > Management > Administration

    On the Management Authentication Servers, there is a space called Server Group. You select the Server Group which was configured above



    ------------------------------
    Shpat | ACEP | ACMP | ACCP | ACDP |
    -Just an Aruba enthusiast and contributor by cases-
    ------------------------------



  • 3.  RE: Aruba Controller administrator access with AD credentials

    Posted Sep 25, 2023 06:58 PM

    controller firmware AOS 6.x.x is end of support 

    it is recommended to upgrade the later versions.



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------