I use 22.214.171.124 version controller,
Is it possible to integrate a RADIUS server for controller login, using my AD username and password in the GUI?
Yes it is possible.
You have to Create the RADIUS Authentication with AD as source under:Configuration > Security > Authentication
If you are using LDAP, then configure the necessary parameters on LDAP Server
If you are using NPAS , then configure the necessary parameters on RADIUS Server
After that, as step two, navigate to:Configuration > Security > Authentication > Server > Server Group
Create a server group and select the above created Server (Either RADIUS or LDAP)
After you finish the steps mentioned above, navigate to:
Configuration > Management > Administration
On the Management Authentication Servers, there is a space called Server Group. You select the Server Group which was configured above
controller firmware AOS 6.x.x is end of support
it is recommended to upgrade the later versions.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.