Wired Intelligent Edge

 View Only
last person joined: 16 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Expand all | Collapse all

Aruba CX switch is not in sync with aruba central

This thread has been viewed 25 times
  • 1.  Aruba CX switch is not in sync with aruba central

    Posted 14 days ago

    The issue is that the switch shows as connected to central on the switch CLI but on the central UI it shows as offline .

    The switch firmware is 10.10.1071 



  • 2.  RE: Aruba CX switch is not in sync with aruba central

    EMPLOYEE
    Posted 14 days ago

    have you moved those switches to another Central account? and if you can paste the output of "show aruba-central" for those offline switches



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------



  • 3.  RE: Aruba CX switch is not in sync with aruba central

    Posted 14 days ago

    Hi ariyap,

    no, we have not moved the device to another central account.

    below is the show Aruba-central output as requested :

    eff-n-cin-sw-as1# sh aruba-central 
    Central admin state                     : enabled
     
    Central location                        : device-uswest4-d2.central.arubanetworks.com
    VRF for connection                      : default
    Shared Token                            : N/A
    Central connection status               : connected
     
    Central source                          : activate
    Central source connection status        : connected
    Central source last connected on        : Sun Dec 17 03:33:39 UTC 2023
    System time synchronized from Activate  : True
     
    Activate Server URL                     : devices-v2.arubanetworks.com
    CLI location                            : N/A
    CLI VRF                                 : N/A
     
    Source IP                               : 10.78.82.12
    Source IP Overridden                    : True
     
    Central support mode                    : disabled



  • 4.  RE: Aruba CX switch is not in sync with aruba central

    EMPLOYEE
    Posted 13 days ago

    this is very odd, perhaps you need t contact Aruba support



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------



  • 5.  RE: Aruba CX switch is not in sync with aruba central

    Posted 12 days ago

    We actually had this exact thing happen.  We were not using templates on this particular set of switches, so if you are this would not be the problem.

    In order to make some changes for testing the engineer did an aruba-central disable, and forgot to enable afterwards.  Everything showed as yours does.  Just a possability.




  • 6.  RE: Aruba CX switch is not in sync with aruba central

    Posted 10 days ago

    was the issue resolved after enabling aruba-central?




  • 7.  RE: Aruba CX switch is not in sync with aruba central

    Posted 10 days ago

    Yes.


    As soon as we did aruba-central enable it showed back in central.  The changes that the engineer made locally did get overwritten, but that is as it should be anyhow.