The below table reflects the status of all Aruba hardware and software currently under FIPS 140-2 evaluation:
7200 Controllers with ArubaOS FIPS Firmware
RAP 5-WN, Dell W-RAP-5WN Remote Access Points
Common Cryptographic Module Version 1.0
RAP-3WN, RAP-3WNP, RAP-108, RAP-109, AP-114, AP-115 APs
AP-134, AP-135, RAP-155, RAP-155P
3000 and 6000/M3 Mobility Controllers with ArubaOS FIPS Firmware
620 and 650 Controllers with ArubaOS FIPS Firmware
AP-92, AP-93, AP-104, AP-105, AP-175 Wireless Access Points
AP-134, AP-135, RAP-155, RAP-155P Wireless Access Points
FIPS 140-2 Testing Phases:
IUT → Review Pending → In Review → Coordination → Finalization
What are the latest devices and OS that are FIPS 140-2 compliant?
I am using AP-274, 225 & 325.
I am using OS 126.96.36.199-FIPS_65874 in controller models 7030 & 7205
and OS 188.8.131.52-FIPS_69644 in controller model 7210
Are the controllers, OS and APs I listed covered uner 140-2? I reveived lables with the AP225 & 325s that just said FIPS 140.
I need an article or document for proof of this as I am doing STIGs.
Take a look here:
Search for Aruba and you'll see everything including certificates of validation.
AP 274 - AOS 8.2 #3485, AOS 6.5.1 #3022, AOS 6.5.0 #2498
AP 225 - AOS 8.2 #3485, AOS 6.5.1 #3024, AOS 6.4.4 #2199
AP 325 - AOS 8.2 #3485, AOS 6.5.1 #2989
70xx Series - AOS 6.5.1 #3026, AOS 6.5.0 #2136 - Note that AOS 8.2 is imminent.
72xx Series - AOS 6.5.1 #3025, AOS 6.5.0 #2136 - Note that AOS 8.2 is imminent.
If you have any other questions regarding STIGs, please feel free to reach out. firstname.lastname@example.org
<edit>We validate to FIPS-140-2 Level 2 for all Controllers and APs.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.