Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Aruba switch per port tunneled node

This thread has been viewed 9 times

  • 1.  Aruba switch per port tunneled node

    Posted Jul 02, 2020 08:03 AM

    Hi ,

     

    I have an aruba controller 7205 and an aruba 2540 switch.

    I want to configure per port tunneled node on the switch, it seems like that this feature is not allowed on the aruba 2540 switches.

     

    Which aruba switches support this feature and in which softwareversion?

     

    Regards

    Christopher


    #2540
    #7205


  • 2.  RE: Aruba switch per port tunneled node

    Posted Jul 02, 2020 08:53 AM

    You will need a 2920/40 or one of the higher end model switches with os 16.04 or higher.

     

    Also some key points to note:

     

    *Make sure the tunneled node vlan Is present on both the switch and the controller.(Also check the status of the vlan)

     

    *Check to see if Jumbo frames are enabled.

     

    *Make sure you have sufficient licenses for each PPTN.