Government and Military

 View Only
last person joined: 15 days ago 

Deploying HPE Aruba Networking wireless LAN environments requiring a high level of security.
Expand all | Collapse all
This thread has been viewed 2 times
  • 1.  Aruba6000-US

    Posted Sep 25, 2017 12:34 PM


    This controller has  a "mobile" wlan.  Not sure how to configure it. Is there some documentation that I can read about it?  Thanks.  

  • 2.  RE: Aruba6000-US

    Posted Sep 25, 2017 10:21 PM

    Does it exist already and you need to manipulate it, or you need to create one?

  • 3.  RE: Aruba6000-US

    Posted Sep 26, 2017 02:41 AM
    It exists already and I need to connect it to a switch with a vlan.


  • 4.  RE: Aruba6000-US

    Posted Sep 26, 2017 03:42 AM

    What VLAN that SSID is tied to is located in the Virtual AP profile.  On the controller, you can create a VLAN, assign it to a physical port on the controller as an access port or as part of an existing trunk and change the Virtual AP to that VLAN.


    For example if I wanted to switch an SSID to vlan 8, I would do this:


    config t

    vlan 8

    interface gigabitethernet x,y

    switchport mode access

    switchport access vlan 8


    I would then go into the GUI, and find the Virtual AP that corresponds to the one I want and change it to 8...

  • 5.  RE: Aruba6000-US

    Posted Sep 26, 2017 12:30 PM

    I'm not seeing a "virtual AP profile".

  • 6.  RE: Aruba6000-US
    Best Answer

    Posted Sep 26, 2017 03:38 PM

    Go to Configuration> Wireless Lan> AP Configuration.  Edit the ap-group that your access point should be in.   Expand Wireless LAN and you should see your Virtual APs in that group.

  • 7.  RE: Aruba6000-US

    Posted Sep 26, 2017 04:49 PM

    Ok, I see it.  Thank you very much.  Good group. First time I asked for help here.  So, thanks again.