AOS-CX Switch Simulator

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

ArubaOS-CX_10_10_0002 copy to statup-config fails

This thread has been viewed 27 times

  • 1.  ArubaOS-CX_10_10_0002 copy to statup-config fails

    Posted Jun 26, 2022 06:31 AM
    Hi All,
    Testing the new version of the simulator, I observ my ztp solution using DHCP and TFTP fails. 

    Testing manually with copy tftp://[ip]/sw01.conf startup-config vrf mgmt fails with:
    Copying configuration: [Failure]
    exit status 5

    When using copy - paste into the console the configuration comes in fine.

    Testet on VMware workstation 16.2.3, VMware ESXI 6.5 and EVE-NG Pro 5.0.1-17

    Anyone knowing where to lookup the exit status 5? Anyone got this working? Anyone tested it on hardware? 

    This have been working fine on both 10.08 and 10.09.

    ------------------------------
    Arne Opdal
    ------------------------------


  • 2.  RE: ArubaOS-CX_10_10_0002 copy to statup-config fails

    Posted Oct 06, 2022 10:41 PM
    I am Facing the same issue, i am testing a configuration push with Ansible, got error 500 and the same exit status 5 when trying to copy the configuration from a remote tftp. On Ansible i recieve the error "GENERIC OPERATION ERROR: Error copying configuration. exit status 5\\n: Code: 500'\n" also tested with the new 10.10.1000 version same behaviour

    All works on version 10.09.0002.
    Original Message