Wireless Access

 View Only
last person joined: 15 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Attribute "Class" in RADIUS accounting

This thread has been viewed 2 times

  • 1.  Attribute "Class" in RADIUS accounting

    Posted Sep 15, 2016 08:32 AM

    I have controller MSM760 (6.6.0.0-22530) and AP MSM410/MSM430.

    I want to use "RADIUS accounting".
    I need to attribute "Class" contains the necessary information to me, such as string "tac".

    The manual says:

    Class
(string)
As defined in RFC 2865. Multiple instances are supported.

    The RFC 2865 says:

    5.25. Class
Description

This Attribute is available to be sent by the server to the client
in an Access-Accept and SHOULD be sent unmodified by the client to
the accounting server as part of the Accounting-Request packet if
accounting is supported. The client MUST NOT interpret the
attribute locally.

    But the default attribute "Class" already contains data unintelligible «70:0d:07:9a:00:00:01:37:00:01:02:00:0a:00:09:21:00:00:00:00:61:0b:6c:5f:0e:7b:db:a9:01:d2:03:5e:46:1e:de:10:00:00:00:00:00:01:dc:83»,
    and if I add the attribute "Class" = "tac" on the RADIUS server, I still do not see this "Class" = "tac" in the accounting information.

    Why attribute "Class" already contains information and why not add my information?

    link captured packets

     


    #class
    #attribute
    #accounting
    #Radius