Is there any possibility to authenticate a Aruba AP and provide trunk vlan to the port?
Using Aruba CX and mac auth.
I tried to apply the following role
port-access role AP auth-mode device-mode poe-priority critical vlan trunk native 22 vlan trunk allowed 1,20-28
But the port is on failed status with the following output
your switch config snippet is correct. are you using ClearPass ?
here is the technote that wrote that could help which covers the exact scenario.
Check if all vlans are configured on switch.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.