Hi,
We have Aruba 7210 controller with AOS 6.5 with AP325.
All AP and SSID configured in tunnel mode for H.O.
Now we are planning to implement branch office wireless solution in bridge mode with same "SSID" and H.O. controller for authentication(redius and AD is located at H.O.).
From branch side default route is configured on switch and firewall towards H.O.
Need some info on below points.
1) What will be VLAN no. on WLC for branch office
2) Do i need to pass that VLAN on WLC and core switch trunk port
3) Can i use same data VLAN(vlan 150-for wired users) for wireless users and and AP ip
4) Do i need to configure route on WLC for branch network subnet