Hi,
Just want to know if there is such setting that can be able to achieve my client's requirement into which users will be associate to 5GHz in the AP instead of 2.4Ghz while there setting in there laptop is in MIXED
MODE. There Laptop is capable with 2.4 and 5Ghz.
Below are the screenshot and configuration in WLC.
VAP Config - TEST
Band Steering - Enabled
Steering Mode - Prefer 5GHz
Laptop Setting: Mixed Mode
Observation: Can connect but still in the 2.4Ghz.
VAP Config - TEST
Band Steering - Enabled
Steering Mode - Force 5GHz
Laptop Setting: Mixed Mode
Observation: Can connect and its on 5GHz. But then I set my Laptop setting to 2.4Ghz, I will not be able to connect anymore.
Note: As per my understanding, 5GHz only advantage is interference. I can achieve the same speed on my Laptop until 300Mbps either connected to 2.4Ghz or 5Ghz. 2.4GHZ cover a wider range compared to 5Ghz
and speed is not much difference since I will be able to achieve the same speed when connected to either 2.4 or 5Ghz. Anyone can share there thoughts regarding this one if there is such setting in Aruba that can do
with this one?